The Ford Barn - View Single Post

russcc · 08-19-2020, 09:35 AM

Yes this is for a 59L with a 21A distributor. I have the same setup on the 59 in the roadster and used Belden wires from NAPA, but I can't remember what part # I started with. These are Belden Edge Premium 7 MM, metallic SAE 14. I had to trim some to length an install right angle connectors for the 21A end so they both ends were right angle. Photo.

08-19-2020, 09:35 AM	#4
russcc Senior Member Join Date: May 2010 Posts: 2,871	Re: 59 AB Plug wire set Yes this is for a 59L with a 21A distributor. I have the same setup on the 59 in the roadster and used Belden wires from NAPA, but I can't remember what part # I started with. These are Belden Edge Premium 7 MM, metallic SAE 14. I had to trim some to length an install right angle connectors for the 21A end so they both ends were right angle. Photo. Last edited by russcc; 02-23-2021 at 07:06 AM.