Re: 6 V Lithium Jump Start?
I have used a 12V Lith battery pack to start a 6 V vehicle.
Your points do not care nor does your coil.
1. Attach to starter Lug.
2.Ground
3.Turn off any lights, or 6 volts acc.
4.Do not activate brake lights
5 Start and immediately remove and off ya go.
Now if it does not turn over immediately and start do not push it find out what the problem is!
Now cranking works and so does pushing but..... If battery is completely dead.... guess what .. no power to ignition so no spark so no go! Not like old magneto ignitions.
|