The Ford Barn - View Single Post - I need help with a '35 Flathead engine issue

Terry,OH · 11-24-2015, 12:03 PM

Have you changed the ignition condenser? They do go bad and effect is very close to your symptoms. Miss and stalling when warm. NAPA sells a good condenser I believe most are using the IH200. You have to do a bit of modifying to get it to fit the 33-36 distributor or the FA5 without modifying.

11-24-2015, 12:03 PM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: I need help with a '35 Flathead engine issue Have you changed the ignition condenser? They do go bad and effect is very close to your symptoms. Miss and stalling when warm. NAPA sells a good condenser I believe most are using the IH200. You have to do a bit of modifying to get it to fit the 33-36 distributor or the FA5 without modifying. Last edited by Terry,OH; 11-24-2015 at 12:14 PM.