Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 47Monarch
Thanks to all that answered I know it is a 1.5 ohm coil and should be 3ohm so do I need a different coil resistor or what my knowledge of electricity is about the same as brain surgery as far as I know distributor is stock again thanks for everyone's input
|
With a 12v system you will need 3 ohms so you will need to add a 1,5 ohms resistor to give required 3 ohms total which will then give approx 3 to 3,5 amps current draw to coil input.
Phil NZ