Thread
:
Platigage and bearing clearances
View Single Post
01-26-2017, 12:36 PM
#
4
Jim Brierley
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,089
Re: Platigage and bearing clearances
As sea slugs says. You are looking for total clearance. If doing it in-car, put a little upward pressure with a jack under the crank so you get a true reading. .0015 is fine for a B that is not raced.
Jim Brierley
View Public Profile
Send a private message to Jim Brierley
Find More Posts by Jim Brierley