View Single Post
Old 07-26-2021, 02:38 PM   #8
Adam/Mill Valley CA
Senior Member
 
Adam/Mill Valley CA's Avatar
 
Join Date: May 2010
Location: Mill Valley,CA
Posts: 275
Default Re: 3-brush gen problems

Well, contacted C+G and unfortunately they do not have the FunProjects regulator available, likewise for Joe's Antique Auto in Massachusetts. I'm going to put in a cutout, I'm not anticipating problems since the draw is low even with headlights on as I have LED bulbs in the headlights. I do have an original 1936 tube radio installed which is a bit of a draw but I don't listen to it too much since there's hardly anything worth listening to on AM radio (!)
Purely out of curiosity, and I address this to Kevin (you appear very knowledgeable about these old generators)-couldn't one disable the third brush function and wire the generator to a standard 3-terminal regulator (with cutout, voltage and current regulating functions) so that it behaves like a later 2-brush generator? Just thinking out loud.


Thanks,
Adam
__________________
1936 pickup, stock, black
1965 Mustang coupe 289/4bbl, black/red
1971 Alfa Romeo GTV 1750 coupe, dark red/tan
1970 911E 2.2 litre dark blue/black
1968 BMW R50/2 US, black (m'cycle)
1967 Triumph TR6R , sea foam/cream (m'cycle)
2022 Royal Enfield Interceptor 650 red (m'cycle)
1974 Honda CB750 red (m'cycle)
2000 Kawasaki W650 blue/silver (m'cycle)
Adam/Mill Valley CA is offline   Reply With Quote