The Ford Barn - View Single Post

JSeery · 10-21-2020, 03:02 PM

Might try rigging up a puller with a flat plate of some type with a hole in the center placed over the steering shaft. Then with 3 or 4 holes in it and bolts or all thread screwed into the bushing try tightening a bit at a time and see if it will come out.

10-21-2020, 03:02 PM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Removing upper steering shaft grommet Might try rigging up a puller with a flat plate of some type with a hole in the center placed over the steering shaft. Then with 3 or 4 holes in it and bolts or all thread screwed into the bushing try tightening a bit at a time and see if it will come out.