The Ford Barn - View Single Post - Reproducing Door Panel Retainer Nails ( A-35704-A )

Tinbasher · 12-29-2019, 10:35 AM

This sounds like a pain. But if you can support the nail head fron underneath, then you can take a sharp punch and hammer the dimples into the nail head. The only way I can think of doing it. Have you tried "Restoration Supply" in California to see if they have these nails.
My thoughts. JP

12-29-2019, 10:35 AM	#2
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,174	Re: Reproducing Door Panel Retainer Nails ( A-35704-A ) This sounds like a pain. But if you can support the nail head fron underneath, then you can take a sharp punch and hammer the dimples into the nail head. The only way I can think of doing it. Have you tried "Restoration Supply" in California to see if they have these nails. My thoughts. JP