The Ford Barn - View Single Post

Steve Plucker · 02-27-2021, 01:00 PM

I am in need of a photo of the Front Fender bracket #3 as described in the Standards:

3. “In April 1929, stamped (tapered channel) fender brackets were phased into production. The stamped bracket was secured with three 3/8” diameter bolts. The lower portion where the bracket attached to the frame formed a triangular shape with straight sides. Either the forged or the stamped design was used on April and May 1929 vehicles*”.

Thanks.

Pluck

02-27-2021, 01:00 PM	#1
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Front Fender Bracket #3 I am in need of a photo of the Front Fender bracket #3 as described in the Standards: 3. “In April 1929, stamped (tapered channel) fender brackets were phased into production. The stamped bracket was secured with three 3/8” diameter bolts. The lower portion where the bracket attached to the frame formed a triangular shape with straight sides. Either the forged or the stamped design was used on April and May 1929 vehicles”. Thanks.* Pluck