Sponsored Links (Register now to hide all advertisements)
I did catch that - as I say nice pix. The hub on the right is obviously "stock" and the hub on the left obviously "slinger collar." My only reason to ask about the backing plates is to satisfy my curiosity how the slinger collar clears the part no. 33 - which it might - but then again might not. If it fits inside the part no. 33 then count yourself lucky as its probably an improvement on the original setup
(many have trouble with grease "drooling" down the inside of the hub and making its way between the hub and the brake drum itself. We entertained exactly this issue perhaps two months ago for an inquirer.)
Joe K