Quote:
Originally Posted by wrndln
dmaxweb wrote:
I could be wrong but I seem to recall the stamped depression was added to compensate for the switch to the tall (9") rear panel. Mine has 7" panel.
Either way, everything is assembled and painted so taking panels apart is not a viable option
Me
I believe you are correct in that the shorter 28/29 coupe panels below the lid didn't need a depression in the curved inner panel to line up the banana bracket with the hole in the vertical bracket. However, Randy in ca wrote: a 30 coupe has the tall lower panel. I agree with him, 30 coupes definitely have the taller 9 1/2" panel.
|
My '30 coupe has a '29 lid. It also has the round tube rear bumper brace used thru '29.