The Ford Barn - View Single Post

Bob Bidonde · 03-19-2021, 09:17 AM

Valves are not difficult to cut with a sharp reciprocating hacksaw blade / 4" angle grinder. I make tools out of the valve stems.

03-19-2021, 09:17 AM	#3
Bob Bidonde Senior Member Join Date: May 2010 Location: Long Island, NY Posts: 3,470	Re: Valve train disassembly question Valves are not difficult to cut with a sharp reciprocating hacksaw blade / 4" angle grinder. I make tools out of the valve stems. __________________ Bob Bidonde