Re: Stalls When Braking
http://model-a.org/symptoms.html
Engine dies when vehicle comes to a stop
Common Causes
* Float is set too high or a pin hole absorbs gasoline into float.
* Compensator Jet Orifice contains dirt or rust, or is too small.
* Idling Jet Orifice contains dirt or rust, or is too small.
* Idle Air Adjust Screw is mis-adjusted or too short, collapsing spring before it seats.
* Throttle Idle Adjustment Screw is mis-adjusted.
*Upper Casting Idle Jet Passage is restricted to Idle throat port.
__________________
1931 160B & 1931 68B
If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?
|