Quote:
Originally Posted by Kube
If concourse correct (button color) is not too important to you, then eBay is a good place to find a NORS button. You can usually tell if they are truly old stock if the "start" is stamped in the stainless bezel deeply and is quite legible. The repops are stamped very lightly. It's a noticeable difference.
When you install your "new" switch (dash button) I'd suggest you solder a wire to the body of it. Run that wire to a nearby ground. Rest assured, this makes a huge difference.
In every one of my restorations I carefully do this so the "extra" wire can't be detected.
|
Will start looking, I remember your tip from past posts and am going to do it.