View Single Post
Old 07-09-2020, 12:39 PM   #12
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 8,990
Default Re: 39 starter circut

Quote:
Originally Posted by marko39 View Post
I tried an old crusty Ford solenoid an bingo! Works like it should and I learned something new. This site is a wealth of information. Now for a different button, does anyone sell nos. or Nors. ones? Thanks, Mark
If concourse correct (button color) is not too important to you, then eBay is a good place to find a NORS button. You can usually tell if they are truly old stock if the "start" is stamped in the stainless bezel deeply and is quite legible. The repops are stamped very lightly. It's a noticeable difference.

When you install your "new" switch (dash button) I'd suggest you solder a wire to the body of it. Run that wire to a nearby ground. Rest assured, this makes a huge difference.
In every one of my restorations I carefully do this so the "extra" wire can't be detected.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is offline   Reply With Quote