The Ford Barn - View Single Post

Tom Endy · 04-23-2020, 02:54 PM

What is the consensus in the Model A kingdom about what type of body panel insulation material to use. I did a search on Fordbarn and see there is a product called Dynamats that some have used.

Is it better to use a cut and peel material or something that can be sprayed on from a can.

I would prefer to use something I can get from Home Depot or Lowes. Also something that will stay in place and not absorb moisture.

Tom Endy

04-23-2020, 02:54 PM	#1
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Insulation material What is the consensus in the Model A kingdom about what type of body panel insulation material to use. I did a search on Fordbarn and see there is a product called Dynamats that some have used. Is it better to use a cut and peel material or something that can be sprayed on from a can. I would prefer to use something I can get from Home Depot or Lowes. Also something that will stay in place and not absorb moisture. Tom Endy