The Ford Barn - View Single Post

scooder · 03-23-2015, 02:55 AM

Darol,
Walt's post above explained how the two are isolated. If you look at the underside of an 8BA inlet and gasket, and compare a 59A inlet and gasket, you'll see what we're talking about.
I do agree with Walt, the easiest way out, is to use a 59A type inlet manifold.
Martin.

03-23-2015, 02:55 AM	#12
scooder Senior Member Join Date: Jul 2010 Posts: 2,593	Re: Fuel pump rod and pump issue Darol, Walt's post above explained how the two are isolated. If you look at the underside of an 8BA inlet and gasket, and compare a 59A inlet and gasket, you'll see what we're talking about. I do agree with Walt, the easiest way out, is to use a 59A type inlet manifold. Martin.