The Ford Barn - View Single Post

Bored&Stroked · 03-20-2024, 01:12 PM

You're going to have a great engine! Think about putting a mild cam in it - just so you can have a bit of a "hotrod sound" - maybe an Isky 1007B grind. I'd also put a two-carb manifold or a late Mercury manifold bored out for a bigger Rochester carb.

This is probably the only hotrod engine you're going to build . . . so have fun!

03-20-2024, 01:12 PM	#3
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,097	Re: 276 stroker from 35 years of parts You're going to have a great engine! Think about putting a mild cam in it - just so you can have a bit of a "hotrod sound" - maybe an Isky 1007B grind. I'd also put a two-carb manifold or a late Mercury manifold bored out for a bigger Rochester carb. This is probably the only hotrod engine you're going to build . . . so have fun!