The Ford Barn - View Single Post - KR Wilson Combination Machine Raising Block

John · 11-16-2020, 08:50 AM

The Model A engine bore is, if memory serves me right, 1/8" off center from what the Model T bore was. The plate is to raise the block to make up the difference when boring the cylinders.

11-16-2020, 08:50 AM	#9
John Senior Member Join Date: May 2010 Location: Richmond, VA Posts: 189	Re: KR Wilson Combination Machine Raising Block The Model A engine bore is, if memory serves me right, 1/8" off center from what the Model T bore was. The plate is to raise the block to make up the difference when boring the cylinders.