Quote:
Originally Posted by 50MercMetalHead
I’ve managed to get down to just the block and I’m about ready to send it off to the machine shop to get acid dipped and to have new cam bearings installed, the only removable thing left is the crank breather/road draft tube that runs from the crankcase to the intake via the lifter valley. Im not really able to get the tube out without wrecking it, and it was already really misshapen from whoever rebuilt it last, so does anybody have a source for finding a replacement? I know it’s just a plain old 1-5/16” tube from other posts here, but I haven’t had much luck looking for a replacement.
|
Quote:
Originally Posted by 19Fordy
|
I believe this internal tube for an 8BA that goes in the front of the valve chamber is what he's looking for. DD
...