Re: '40 Steering Lock Disassembly Follow Up?
Fred A;
Your lock bolt has a keyway that runs in a guide pin you spotted. There also
is a block bar across the keyway that blocks the bolt from moving inward till
the guide pin is drilled tapped and pulled. The pin and keyway is much smaller
than the pin you see from the bottom.
Looks like Ken was able to disassemble with out pulling the guidepin.
The key cylinder must be removed to slide the lockbolt inward
Good luck Gene Tulsa
Do a search in tis foreum for others opinions - lots:
column lock switch
Last edited by G32; 04-08-2021 at 01:10 PM.
Reason: Suggesion
|