The Ford Barn - View Single Post

chambies · 10-21-2019, 01:14 PM

Good info guys.... so should I measure poundage by the Les Andrews measurement of 2.25 installed height? Should be 60lbs for a mild cam. Shim if needed, then check for coil bind? Sound correct?
Thanks in advance!

10-21-2019, 01:14 PM	#11
chambies Senior Member Join Date: May 2010 Posts: 143	Re: Valve spring issues Good info guys.... so should I measure poundage by the Les Andrews measurement of 2.25 installed height? Should be 60lbs for a mild cam. Shim if needed, then check for coil bind? Sound correct? Thanks in advance!