View Single Post
Old 05-18-2014, 12:30 PM   #14
1932BB
Senior Member
 
Join Date: Jan 2012
Location: Marquette Mich.
Posts: 125
Default Re: New project 1936 ford truck

You will likely have trouble finding a tray or flatbead frame as Ford trucks had a frame width of 38 inches from 32 to 36 only. Model AA flatbeds will not work as AA frame rails are not parallel. From 37 on frame width was standardized for big trucks at 34 inches. I took measurements off a surviving flatbed, drew up plans and had a local shop with a ten foot metal brake make all the rails and cross pieces. A local welder stuck it all together. The deck is made of black stained wood with flat skid strips (this allows for wiggle room as planks do not have to be absolutely straight). It is a "reasonable facsimile" project but it looks good and trim. I am not good at posting pictures but a picture can be seen on the Trucks Gallery for 1932 on the Early Ford V8 website. I can send copies of my drawings if you wish.

Truck wheel bolt patterns changed in 34 to a bigger bolt pattern. Be sure to measure yours before buying a spare as they look similar unless viewed side by side.

Big Ford Trucks are COOL!
1932BB is offline   Reply With Quote