Thread: oil level
View Single Post
Old 05-24-2020, 08:12 PM   #18
1crosscut
Senior Member
 
1crosscut's Avatar
 
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,909
Default Re: oil level

Did you use plastigauge to set the clearances or just by feel?
If by feel you probably need to check them again and use plastigauge to set them.

Since you pulled the pan and cleaned it I'm sort of at a loss as to why the oil didn't drain better.

5 quarts in 300 miles is an alarming amount of oil to be loosing. It's got to be going somewhere.
__________________
Dave / Lincoln Nebraska
1crosscut is offline   Reply With Quote