The Ford Barn - View Single Post

Phil Gillespie · 06-13-2019, 01:29 AM

So today removed inlet manifold to access valve valley area again.Removed covers on oil feed line. All drain holes are clear. Thanks to Mart for info supplied. Will either be nil seals at inlet valves or glazed bore for the cause of my oil usage. This will happen some time!
Phil NZ

06-13-2019, 01:29 AM	#11
Phil Gillespie Senior Member Join Date: Sep 2011 Location: Christchurch New Zealand Posts: 1,611	Re: 59A Valve Gallery Oil Present. So today removed inlet manifold to access valve valley area again.Removed covers on oil feed line. All drain holes are clear. Thanks to Mart for info supplied. Will either be nil seals at inlet valves or glazed bore for the cause of my oil usage. This will happen some time! Phil NZ