The Ford Barn - View Single Post

Jerold Ebke · 02-28-2019, 09:46 PM

Thanks for sharing your knowledge and experience.
I am going to hammer / dolly fenders bolted to frame or body. I will then as Brent suggests, set everything back on the frame and start shimming and see what happens. Once the mounting formula of how many shims where is hopefully determined, then dissemble and start on final finish.
Maybe more advice needed later.
Jerry

02-28-2019, 09:46 PM	#5
Jerold Ebke Member Join Date: Jan 2017 Location: Nebraska Posts: 49	Re: Body to frame to help sagging doors Thanks for sharing your knowledge and experience. I am going to hammer / dolly fenders bolted to frame or body. I will then as Brent suggests, set everything back on the frame and start shimming and see what happens. Once the mounting formula of how many shims where is hopefully determined, then dissemble and start on final finish. Maybe more advice needed later. Jerry