View Single Post
Old 12-05-2021, 11:55 AM   #6
MickyD
Senior Member
 
MickyD's Avatar
 
Join Date: Sep 2015
Location: Welcome NC
Posts: 207
Default Re: '31 Model A Roadster Top Wood

Sponsored Links (Register now to hide all advertisements)
I do some wood working and I use a lot of super glue. The glue I use with a spray on hardener. This stuff does wonders on wood that has chips, or breaks in it. It can be used on saw dust to fill small or large holes. I have made and fixed the bows on my model a roadster.using it. Amazon sells the wood super glue and fast hardening spray and if you can't get it there you can get it at pennstate industries. I use the medium and thick CA (cyanoacrylate) glue depending on what you are working on. If you use CA glue wear rubber type gloves or be careful as once you get it on you it will take a lot of finger nail polish remover to get it off you. I can not tell, you how many times I glued my fingers together. Gorilla glue sells a similar product but I have not had good luck with it. The CA glue can be bought at a lot of places. Also use a breathing mask for health reasons when using this glue.
MickyD is offline   Reply With Quote