The Ford Barn - View Single Post

alanwoodieman · 04-05-2020, 09:28 AM

run a ground wire from one of the screws holding the gauge to the tank to a good clean location--grounded mine to the cab back wall with ign on, if you momentarily touch the gauge wire to this ground does the gauge on the dash work?

04-05-2020, 09:28 AM	#8
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,964	Re: gas gauge 1939 tonner run a ground wire from one of the screws holding the gauge to the tank to a good clean location--grounded mine to the cab back wall with ign on, if you momentarily touch the gauge wire to this ground does the gauge on the dash work?