Quote:
Originally Posted by murrie
the engine would fire and not run.]pulled manifolds assuming the intake was leaking and not pulling gas up to run,plus exhaust manifold was leaking.i never got engine to run.i have got good spark at points and fuel to carb. but cant get it running.
|
This is a very common problem.
If engine starts and
runs a second or two then stalls.
Most likely cause is failure to open the GAV ONE turn before starting the engine.
This is covered in the
Model A Owners Manual.
If temperature is 10 or 20 below zero
then More GAV may be needed to keep engine running.