The Ford Barn - View Single Post

Wm J. · 01-14-2018, 06:19 PM

Hard times,

To answer your original question, call Max Hermans at H&H and ask him. As indicated by the MAX in yellow letters on the crank counter weight H&H is the builder of the engine. That plus the fact the thrust is on the center main.

Wm J.

01-14-2018, 06:19 PM	#31
Wm J. Junior Member Join Date: Aug 2010 Posts: 29	Re: bearing insert identification help... Hard times, To answer your original question, call Max Hermans at H&H and ask him. As indicated by the MAX in yellow letters on the crank counter weight H&H is the builder of the engine. That plus the fact the thrust is on the center main. Wm J.