The Ford Barn - View Single Post

ken ct · 10-20-2012, 07:20 PM

You can solder up the hole in the float if brass and is not on a seam! ken ct. Test for bubbles in hot water after fixing. ken ct.

10-20-2012, 07:20 PM	#3
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: Shellac on Cork Float You can solder up the hole in the float if brass and is not on a seam! ken ct. Test for bubbles in hot water after fixing. ken ct.