The Ford Barn - View Single Post

gilitos · 02-29-2016, 11:08 AM

Also, I drained about 3.5 qts of oil and it looked fine. It was between the marks on the dipstick. There are now fine droplets of babbitt on the inside of the block around #2. I'll tell you what, that's pretty ugly!! I should post a picture of that for the gallery of Model A horrors.

02-29-2016, 11:08 AM	#20
gilitos Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 209	Re: Why did this rod fail? Also, I drained about 3.5 qts of oil and it looked fine. It was between the marks on the dipstick. There are now fine droplets of babbitt on the inside of the block around #2. I'll tell you what, that's pretty ugly!! I should post a picture of that for the gallery of Model A horrors.