The Ford Barn - View Single Post

JSeery · 08-12-2020, 09:59 AM

The studs need to be installed perpendicular to the block head surface and centered in the holes in the heads. Great care must to taken to be sure this is done. It is not difficult, it just takes time to be sure everything is correct. If you force a head on without correcting the studs you will have a major problem attempting to pull the head in the future.

08-12-2020, 09:59 AM	#7
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Installing head studs in a 59L The studs need to be installed perpendicular to the block head surface and centered in the holes in the heads. Great care must to taken to be sure this is done. It is not difficult, it just takes time to be sure everything is correct. If you force a head on without correcting the studs you will have a major problem attempting to pull the head in the future.