Thread: Pcv
View Single Post
Old 11-09-2017, 10:33 AM   #12
Dick Steinkamp
Senior Member
 
Dick Steinkamp's Avatar
 
Join Date: Apr 2016
Location: Bellingham, WA
Posts: 1,163
Default Re: Pcv

Quote:
Originally Posted by Bob Bidonde View Post

As for leakage from the flywheel housing, I did discover on both of my Model A's that it was predominantly transmission oil, not motor oil. Ford specifies one pint of oil in the transmission. I habitually filled the oil until ran out of the fill plug hole. That is overfilling the transmission and the cause of oil leakage.
From "Model A Instruction Book" (page 13)...

"The new lubricant is poured into the transmission through
the filler hole, located at the right hand side of the transmission
case. Pour sufficient lubricant in until it reaches the level of
the filler hole."


http://www.palmbeachas.com/Model-A-I...ion-Manual.pdf
__________________
All steel from pedal to wheel
Dick Steinkamp is offline   Reply With Quote