Thread: Pcv
View Single Post
Old 11-08-2017, 04:55 PM   #5
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,513
Default Re: Pcv

My father experimented with this many years ago and it did not work. The issue with what your friend is trying to accomplish is that if you have a bad enough oil leak that you need vacuum to correct, you have a bad vacuum leak also unless a positive seal is used on the rear main. At either point, all you end up with is a bad vacuum leak that creates poor performance, and a messy oil leak too. Several have either manufactured a rubber rear main seal, -or modified an existing seal to be used on a Model-A rear main, but many of those have also proved to have issues.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote