The Ford Barn - View Single Post

Kerk · 04-23-2021, 05:19 AM

I would check the slot and pin fit on the ball section of the lever. A rebuild of that area may solve your problem. Just worth a look to see how worn it is. DO BE CAREFUL TO NOT DROP THE PIN IN THE SHIFT TOWER !! jm2cw. kerk

04-23-2021, 05:19 AM	#7
Kerk Senior Member Join Date: May 2010 Posts: 642	Re: Shift lever position / modification I would check the slot and pin fit on the ball section of the lever. A rebuild of that area may solve your problem. Just worth a look to see how worn it is. DO BE CAREFUL TO NOT DROP THE PIN IN THE SHIFT TOWER !! jm2cw. kerk