View Single Post
Old 03-25-2021, 10:31 PM   #9
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,903
Default Re: Early 1928 Exhaust Manifold Assembly

On a Model T, the rings are used to keep the exhaust manifold from warping. Without the rings the manifold would warp over time so that the holes in the block did not match up with the holes in the exhaust manifold. Cast iron grows slightly when heated and does not shrink back down when it returns to room temperature. Each time it is heated it grows a little more.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote