The Ford Barn - View Single Post - pickup bed

moefuzz · 03-03-2021, 04:12 PM

.

The meager few hundred $$ to have them assemble it on their correctly aligned jig/table is worth more than $$$ you'll ever save by attempting it yourself.

You will probably spend hundreds on materials and supplies over and above all the hours of fixing welds that burned not just thru the "factory" primer as well as burned or distorted the adjoining metal and then lumped up behind itself.

Pay the man.

good luck with your project,
moe of the north

.

03-03-2021, 04:12 PM	#10
moefuzz Senior Member Join Date: May 2010 Location: Under A Clean V8 Posts: 228	Re: pickup bed - assembled or disassembled . The meager few hundred $$ to have them assemble it on their correctly aligned jig/table is worth more than $$$ you'll ever save by attempting it yourself. You will probably spend hundreds on materials and supplies over and above all the hours of fixing welds that burned not just thru the "factory" primer as well as burned or distorted the adjoining metal and then lumped up behind itself. Pay the man. good luck with your project, moe of the north . Last edited by moefuzz; 03-04-2021 at 07:02 AM.