The Ford Barn - View Single Post

super flat · 02-14-2014, 10:12 AM

Sounds like your throttle plates are to far open to start with. Back off the idle screws until it idles slow then adjust the mixture with the unisyn.

02-14-2014, 10:12 AM	#4
super flat Senior Member Join Date: Jan 2011 Location: west bend wi Posts: 314	Re: flathead idle issues...help! Sounds like your throttle plates are to far open to start with. Back off the idle screws until it idles slow then adjust the mixture with the unisyn. __________________ I am usually relatively happy------Gary