Thread
:
pertronix for mallory dual point 2527501
View Single Post
01-14-2014, 01:49 AM
#
9
rodderbilly
Member
Join Date: Jun 2010
Location: italy
Posts: 38
Re: pertronix for mallory dual point 2527501
Quote:
Originally Posted by
19Fordy
rodderbilly; I used the following Mallory conversion kit when I converted my Mallory YL-2527501 dual point mechanical advance distributor to electronic in 2003. Also installed matching coil and filter to protect from electrical spikes. I have heard very good things about Pertronix and realize Bubba is the best, but I just wanted to give you my limited info.
http://www.summitracing.com/parts/maa-558/overview/
Also installed this coil:
http://mallory-ignition.com/ignition...coil-2338.html
Also installed this Power Filter ( surge protector):
http://www.amazon.com/dp/B000BWAO2G/ref=asc_df_B000BWAO2G2843550?smid=ATVPDKIKX0DER&ta g=pg-64-86-
20&linkCode=asn&creative=395097&creativeASIN=B000B WAO2G
thanks ..i try a pertronix seller here in Europe..i'm going to buy a 9ml-181 pertronix...hope i'm going on the right way because i'm changing a lot of spark plugs....
rodderbilly
View Public Profile
Send a private message to rodderbilly
Find More Posts by rodderbilly