The Ford Barn - View Single Post

Tanglfoot · 08-15-2018, 10:07 PM

I used 8mm grub screws works fine no need to drill. The trick is not to tap in too far with a taper tap then the plug will lock in the hole, file flush.

08-15-2018, 10:07 PM	#4
Tanglfoot Member Join Date: Jan 2013 Location: Mangawhai NZ Posts: 66	Re: Filling Model B steam holes I used 8mm grub screws works fine no need to drill. The trick is not to tap in too far with a taper tap then the plug will lock in the hole, file flush.