The Ford Barn - View Single Post

Patrick L. · 12-12-2021, 01:14 PM

Yep, I agree. If that many valves are hung open then the side may have to come off. The manifolds don't have to be removed. The valve stems can be squirted and carefully pulled down while being rotated. A lot of turning the engine over and squirting may be needed.
Then as said, 2 cycle oil in the fuel helps afterward.

12-12-2021, 01:14 PM	#13
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: 30 roadster motor woes Yep, I agree. If that many valves are hung open then the side may have to come off. The manifolds don't have to be removed. The valve stems can be squirted and carefully pulled down while being rotated. A lot of turning the engine over and squirting may be needed. Then as said, 2 cycle oil in the fuel helps afterward.