The Ford Barn - View Single Post

Humperhill · 07-22-2019, 07:11 PM

I do have an auto advance but not the Nu-Rex type. The lower plate actually has centrifugal weights and spring loaded. While I do have that sprung movement with the rotor it snaps back. The above movement is in addition to this and does not snap back. I have not removed the valve cover as of yet.

07-22-2019, 07:11 PM	#5
Humperhill Member Join Date: Jun 2019 Posts: 54	Re: Rotation play in distributor shaft I do have an auto advance but not the Nu-Rex type. The lower plate actually has centrifugal weights and spring loaded. While I do have that sprung movement with the rotor it snaps back. The above movement is in addition to this and does not snap back. I have not removed the valve cover as of yet.