View Single Post
Old 04-20-2021, 05:43 PM   #38
Y-Blockhead
Senior Member
 
Y-Blockhead's Avatar
 
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,817
Default Re: Are brake floaters worth it?

Quote:
Originally Posted by SteveE View Post
Does anyone else have the newest Flathead Ted brake floater kit?

I just installed the right rear and wanted to ensure that I placed the two new silver and gold rectangular adjusters in the correct configuration. The Ted instructions are not very clear nor were his sketch and pictures. I placed them on the right side on the back of the rollers with the hole on top for the cotter pins.

Do they go in the other direction with the offset rectangular face on top?
Steve, you have them installed correctly. They replace the stock roller pins and ride on the roller tracks.

https://www.snydersantiqueauto.com/P...earchByKeyword

https://www.snydersantiqueauto.com/R...itting-559.pdf

Last edited by Y-Blockhead; 04-20-2021 at 05:56 PM.
Y-Blockhead is offline   Reply With Quote