View Single Post
Old 09-04-2021, 09:21 PM   #10
Brian
Senior Member
 
Brian's Avatar
 
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,834
Default Re: 50 psi oil pressure gauge

Re: 50 psi Oil pressure gauge
My question was: will an original 37 oil pressure gauge and sender system be damaged by actual oil pressure in excess of 50 psi on start up and a 5 minute warm up idle?

And, my answer was; you'll have no problems with the high oil pressure doing damage the gauge will just be pegged at first whilst it's getting above the 50 lbs
__________________
Unfortunately, two half wits don't make a whole wit!
Brian is offline   Reply With Quote