Quote:
Originally Posted by Randy Lausch
I’m trying to set the float on a zenith according to Les Andres book the float is supposed to be 1 inch & you’re supposed to set them by the washers under the valves . Mine measures about 1& 1/16th with no washers at all under valve. They say not to bend the float. What are you supposed to do then
|
There are some foreign aftermarket floats that are too big and will cause the condition you describe. Recently I tried using a foreign aftermarket float and had the same circumstance. Ended up using a different float and got rid of the foreign aftermarket one. Get the USA made ones if you can.