The Ford Barn - View Single Post

larry harding · 10-25-2020, 07:55 AM

when building my o d i made the 1" spacer/ adapter out of aluminum and just big enough to do the job. i anchored the cable housing to this using a clamp like used on lawnmower throttles. my cable was out of alignment with the lever on the o d. i made thick spacer to move the cable out and a straighter shot to the lever. i hope that is going to help, but would to see a photo of how others have don theirs.

10-25-2020, 07:55 AM	#4
larry harding Senior Member Join Date: Sep 2015 Location: western n.c. Posts: 393	Re: borg warner overdrive when building my o d i made the 1" spacer/ adapter out of aluminum and just big enough to do the job. i anchored the cable housing to this using a clamp like used on lawnmower throttles. my cable was out of alignment with the lever on the o d. i made thick spacer to move the cable out and a straighter shot to the lever. i hope that is going to help, but would to see a photo of how others have don theirs.