Re: Is this normal wear? Aluminum cam gear
One other comment. There should be a hole inside the front of the valve tappet chamber that oils the timing gear. It was knocked out with a hammer after the block was cast so it looks rough. It could be that the hole was not hammered open when the engine was manufactured.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|