The Ford Barn - View Single Post

PeteVS · 08-11-2021, 10:02 AM

Motor mounts and firewall clearance were all worked out with the trans mount flat on the K member. The rear end was not in play at that time. There's enough fore and aft adjustment to handle this. (Notice that there are no pictures of the engine on this site.)

08-11-2021, 10:02 AM	#21
PeteVS Senior Member Join Date: May 2010 Location: FP, NJ Posts: 2,770	Re: '32 rear transmission mount Motor mounts and firewall clearance were all worked out with the trans mount flat on the K member. The rear end was not in play at that time. There's enough fore and aft adjustment to handle this. (Notice that there are no pictures of the engine on this site.) __________________ Don't never get rid of nuthin! Last edited by PeteVS; 08-11-2021 at 11:07 AM.