The Ford Barn - View Single Post

Russ/40 · 10-05-2020, 11:37 AM

Something I have done that stops the seeping stains and gas smell, is to use the light liqued super glue and let it wick into the gasket edges after assembly. Especially on the jet plugs at the bottom of the bowl.

10-05-2020, 11:37 AM	#14
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Carb gasket surface Something I have done that stops the seeping stains and gas smell, is to use the light liqued super glue and let it wick into the gasket edges after assembly. Especially on the jet plugs at the bottom of the bowl.